About the product
The Core IO is a reliable and easily configured distributed 1/0 module range compatible with any Mod bus controller.
You can configure the CR-IO-8DI-RS easily via the dedicated Android app. All you need is an Android device with a camera and Bluetooth. Once you have installed the dedicated app, open it up and scan the QR code on the device located next to the power supply. Once the QR code has been recognised the app will connect to the device and you will be able to start the configuration.
You can configure the CR-IO-8DI-RS via Modbus. Please see the manual for full instructions
The CR-IO-8DI-RS comes with an RS485 connection. The CR-I0-8DI-RS has 8DI. The inputs are configurable for pulse counting, various types of sensors, and logic direction.
The Core IO range comes with opto-isolation on the RS485 building automation controller port.
Other features include the LED’s on the front of the devices representing each input which will help your engineer identify fault statuses quickly, reducing the time spent on call-outs.
The built-in Watchdog function will be there to keep systems running in the event of a power outage or loss of communication between the IO module and the Jace.
Nominal Voltage: 24v AC/DC +%10 -%15
Digital Inputs Configuration: Voltage-free Contact – Pulse input (max 100 Hz, 50% duty cycle, max 50 ohm contact) (count stored in non-volatile memory)
RS485 Connection: Modbus RTU Slave
Ambient Temp. Range (Operating): 0…50 °C (32…122 °F)
Non-operating Range (Storage): -25…+75 °C (-13…+167 °F)
Humidity Range: %5…95 RH, non-condensing
Mounting: For 35mm DIN rail mounting
Degree For Protection: IP20, EN 61326-1
Connections: Plug-in Terminals 1 x 2.5mm²
Documentation & Downloads
All of the models in the Core IO range feature Bluetooth configuration done via an Android device and the dedicated Core IO app, giving you the ability to reduce pre-commissioning times and move swiftly onto the next job.
Bluetooth and Android App – Download the Core IO app here
Core IO has built-in Bluetooth which allows the Core Settings app to run on an Android device to configure the IP settings and I/O.
Please download the app from Google Play – search for “core settings”
Download and install the app, then check/make the following settings changes –
• Open your phone settings (drag down from the top, press the “cog” icon)
• Click on “Apps”
• Select the “Core Settings” app
• Press “Permissions”
• Press “Camera” – set it to “Allow only while using the app”
• Go back then press “Nearby devices” – set it to “Allow”
Business & Industrial > Automation Control Components