What is a 4-20 mA current loop?

The 4-20 mA current loop has been the standard for signal transmission and electronic control in control systems since the 1950’s. The 4 mA to 20 mA current loop is a common method of transmitting sensor information in many industrial process monitoring...

Convert 4-20 mA to 0-10 V using a resistor

All iSMA Universal Inputs cannot read a 4-20mA signal directly, so to read a 4-20mA sensor you will find in the box of every iSMA device (with Universal Inputs) a set of 200 Ohm resistors. It is extremely simple to measure 0-20 mA analog signal from a sensor with a...
YouTube Channel

YouTube Channel

Subscribe to my channel« Prev1 / 4Next »#185 N4 Tridium Niagara - AHU's, Boiler and HWS graphics completed#184 N4 Tridium Niagara - Moving Points to main pages and Bottom Nav#183 N4 Tridium Niagara - Adding BACnet Points to PX page and config#182 N4...
Niagara AX to N4 Migration Guide

Niagara AX to N4 Migration Guide

To use the Migration Tool provided by Tridium you will need a backup(dist file) of a station that is running on AX 3.8, |You cannot migrate only the bog file or a station running a version lower than 3.8. Backup the AX station If you need to include the alarms and...