Switch Mode Power Supply 24Vdc
£44.00 Exc. VAT
The HDR-60 is an economical ultra slim 60W DIN rail power supply, suitable to be installed on TS-35/7.5 OR TS-35/15 mounting rails. The body is designed 52.5mm(3SU) in width, which allows space-saving inside the cabinets.
The entire series adopts the full range AC input from 85Vac to 264Vac (277Vac operational) and conforms to EN61000-3-2.
Description
The HDR-60 is an economical ultra slim 60W DIN rail power supply, suitable to be installed on TS-35/7.5 OR TS-35/15 mounting rails. The body is designed 52.5mm(3SU) in width, which allows space-saving inside the cabinets.
The entire series adopts the full range AC input from 85Vac to 264Vac (277Vac operational) and conforms to EN61000-3-2.
- No-load power consumption <0.3W.
- Isolation class II.
- Pass LPS (Limited power source).
- DC output voltage is adjustable.
- Protections: Short circuit / Overload / Over voltage.
- Cooling by free air convection (working temperature: -30 ~ +70ËšC).
- DIN rail TS-35/7.5 or 15 mountable.
- Overvoltage category III.
- LED indicator for power on.
Specification
DC Voltage:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 24V
Rated Current:Â Â Â Â Â Â Â Â Â Â Â Â 2.5A
Current Range:            0 – 2.5A
Rated Power:Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â 60W
Ripple & Noise (max.):Â Â Â Â 150mVp-p
Voltage Adj. Range:Â Â Â Â Â Â Â 21.6 ~ 29V
Voltage Tolerance:        ± 1.0%
Line Regulation:            ± 1.0%
Load Regulation:          ± 1.0%
Setup, Rise Time:Â Â Â Â Â Â Â Â Â Â 500ms, 50ms/230Vac / Â 500ms, 50ms/115Vac at full load
Hold Up Time (Typ.):Â Â Â Â Â Â 30ms/230Vac - 12ms / 115Vac at full load
Manual
Additional information
Weight | 0.15 kg |
---|---|
Dimensions | 8 × 6 × 6 cm |
You must be logged in to post a review.
Reviews
There are no reviews yet.