Dual Phase Cut Module 30VA per channel – IOPC2

£76.00 Exc. VAT

The IOPC2 converts two 0-10V dc Input Signals to drive two separate 0-20V 50Hz phase-cut outputs, at 30VA per channel for the control of small valve or damper actuators.

Description

The IOPC2 converts two 0-10V dc Input Signals to drive two separate 0-20V 50Hz phase-cut outputs, at 30VA per channel for the control of small valve or damper actuators. The IOPC2 features optoisolator is powered from 24V ac (with a common connection to the input signal), and has Rising Clamp Screw Terminals. The output from the IOPC2 can be boosted to 60VA by using two IOPCA1, 1 per channel.

Specification

Input Signal:                          2 x 0 – 10Vdc
Output Signal:                       2 x 20V phase cut – 30VA per channel.
Power Supply:                       24Vac (common to 0 – 10Vdc input).
Terminals:                              Rising clamp for 0.5 – 2.5mm² cable.
LED Indicators:                      ON when Power on.
Ambient Temp:                       0 to 50˚C
Dimensions:                           78 x 92.5 x 55mm (approx.)

Additional information

Weight 0.5 kg
Dimensions 33 × 10 × 5 cm

Reviews

There are no reviews yet.

Be the first to review “Dual Phase Cut Module 30VA per channel – IOPC2”

Your email address will not be published. Required fields are marked *