Six Stage Relay Module – IOR6

£49.00 Exc. VAT

This IO module is used with DDCs to convert an analogue control output to a staged, reverse staged or sequenced relay output.
LEDs indicate correct operation and low current draw from 0-10Vdc controller means that the IOR6 can work successfully with most BEMs controllers.

Description

Description

This IO module is used with DDCs to convert an analogue control output to a staged, reverse staged or sequenced relay output.
LEDs indicate correct operation and low current draw from 0-10Vdc controller means that the IOR6 can work successfully with most BEMs controllers.

Specification

Input Signal:                    0-10Vdc 1mA min. into 22kΩ impedance
Output Contacts:            8A at 230Vac (resistive load)
Power Supply:                24Vac ± 15% @ 50Hz or 24Vdc +15%/-6%, 90mA max.
Hysteresis:                      ± 0.2Vdc about switching points (± 0.1Vdc in binary)
Operating Modes:           Staged, Reverse Staged, Sequenced
Manual Override:            On/Off/Auto jumper selectable
Electrical Terminals:       Rising cage connectors for 0.5-2.5mm² wire.
Operating Temp.:            -10°C to +40°C, RH 0-80% non-condensing
Dimensions:                     52(H) x 116(W) x 83(D)mm

Additional information

Weight 0.5 kg
Dimensions 33 × 10 × 5 cm

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

%d bloggers like this: