This IO module is used with DDCs to convert an analogue control output to a binary, heat/cool, staged, or sequenced relay output. Typically it is used in such controls as valve and contacts changeover.
It is designed so that every status is clearly indicated with LEDs to facilitate operation and commissioning.
Input: 0 – 10Vdc 1mA min into 22KΩ impedance.
Output: 8Amp @230Vac (resistive)
Supply Voltage: 24Vac/dc +/- 10%
Operating Modes: Binary, Sequenced, Staged, Aux/ RL
Termination: Rising clamp for 0.5 to 2.5mm² cable.
Ambient: -10 to +40°C
Dimensions: 58(W) x 50(D)x 76(H)mm