Compact IO Module DOOC-16-C

£188.10 Exc. VAT

The 16-channel digital output module has 16 open collector outputs, each capable of taking on a maximum load of 100 mA.

Categories: Fidelix IO Modules, Relay and IO Modules Tags: DO, DOOC-16-C, fidelix, IO, IO Module, MODBUS, RS485

Description
Additional information
Reviews (0)

Digital open collector output module, 16 inputs, max 100mA/channel.

Screwless installation with click-on DIN-rail communication bus and power connectors
Push-in spring connectors for cables
Individually detachable terminal blocks per channel

The 16-channel digital output module has 16 open collector outputs, each capable of taking on a maximum load of 100 mA.
Each channel has a green and red LED indicating its current status, and a built-in safety feature to deactivate a channel when power leakage is detected. The module can control 16 high-power relays and swiftly command any device from a serial Modbus master controller.

T Bus connecter (Terminal C) required for MODBUS + and - connection along with other supply voltage 24VDC and consumes 15mA.

If more than 1 module is being installed, you only need one terminal connector, if connecting say 10 of the same or different modules, only one T Bus connector is required.

Communication: Modbus RTU (RS485) at speeds up to 57600 bps. Use no parity, 8 data bits and 1 stop bit. The module will auto-detect the communication speed of the bus (9600, 19200, 38400 or 57600 bps).
Modbus address: The address of the module can be set from 1 to 63 by changing the position of dip-switches 1-6. Each dip-switch represents a binary value, as indicated on the module and datasheet.
Modbus loop termination: On the last module, the Modbus loop must be closed by connecting a 120 Ω resistor between the A and the B side of the RS-485 loop.

DOOC-16-C Fidelix Digital Out Module

– 16 digital outputs
– Short circuit protection with indication
– Programmable default status in case of communication failure
– Programmable default status in case of communication failure
– Pluggable connection terminals
– RS-485 communication with Modbus protocol
– Mounting on DIN rail

The DOOC-16-C has 16 open collector outputs, each output can be loaded with up to 100 mA.
Each output has a green and red LED that indicates the current status, and a built-in safety function to deactivate the channel when e.g. short circuit.
Quick and easy installation as the power supply and communication are integrated into the DIN rail.

Watch the YouTube video: AI-8-C youtube

Technical information
Supply voltage: 24 VDC (+/- 10%)
Current consumption: 5 mA + (16 x 100 mA)
Ambient operating temperature: 0 to +40ºC
Ambient humidity operation: Max 95%RH, non-condensing
Module size: 134 mm x 78 mm x 19 mm
Module weight: 90 g
Protection class: IP20
Communication speed: 9600 bps, 19200 bps, 38400 bps or 57600 bps
Address range: 1 – 63
Communication protocol: Modbus RTU
Load outputs: Max 100 mA